Aqara
Aqara devices that work with Selora and Home Assistant. Aqara products run on the Aqara cloud integration, ZHA, zigbee2mqtt, or Matter over Thread depending on the model.
Devices in this brand
Controls
2 devicesCube T1 Pro
Aqara Cube T1 Pro is a Zigbee controller that turns six gestures (flip, push, rotate, shake, tap, free fall) into automation triggers, with rotation mapped to smooth dimming and volume control.
Wireless Mini Switch
Aqara Wireless Mini Switch is a battery-powered Zigbee button that distinguishes single, double, and long press, so one button drives up to three separate actions. Sticks anywhere, no wiring.
Sensors & Environment
18 devicesClimate Sensor W100
Aqara Climate Sensor W100 is a Zigbee temperature and humidity sensor with an LCD display and three programmable buttons, so it reads the room and doubles as a thermostat-style wall controller.
Door and Window Sensor
Aqara Door and Window Sensor is a compact Zigbee contact sensor that reports open and closed instantly, with multi-year battery life at low cost.
RecommendedDoor and Window Sensor P2
Aqara P2 is a Zigbee 3.0 door and window sensor with battery state reporting, tilt detection, and tamper alerts.
Door and Window Sensor T1
Aqara Door and Window Sensor T1 is a Zigbee 3.0 contact sensor reporting open and closed state, with broad coordinator compatibility and multi-year battery life.
RecommendedMotion and Light Sensor P2
Aqara Motion and Light Sensor P2 is a Matter over Thread motion sensor with a built-in light sensor that pairs natively over Matter, no Aqara hub required.
Motion Sensor
Aqara Motion Sensor is a compact, low-cost Zigbee PIR with a built-in light sensor and long battery life, ideal for blanketing a home with motion triggers.
RecommendedMotion Sensor P1
Aqara Motion Sensor P1 is a Zigbee 3.0 PIR motion sensor with a built-in light sensor and a detection interval adjustable from seconds to minutes, avoiding constant retriggering in busy rooms.
Multi-State Sensor P100
Aqara Multi-State Sensor P100 is a Matter over Thread contact sensor that reports more than open or closed, suiting drawers, cabinets, and tilted openings.
RecommendedPresence Multi-Sensor FP300
Aqara FP300 is a Matter over Thread 5-in-1 sensor combining mmWave presence, motion, light, temperature, and humidity in one device, cutting the number of sensors needed per room.
RecommendedPresence Sensor FP1E
Aqara FP1E is a Zigbee mmWave presence sensor that detects both motion and stillness, holding occupancy in offices and media rooms where a PIR sensor would lose a motionless person.
RecommendedPresence Sensor FP2
Aqara FP2 is a Wi-Fi mmWave presence sensor with configurable zones, multi-target detection, and light level sensing. Used in Selora AI recipes that need precise room-level presence.
RecommendedTemperature and Humidity Sensor
Aqara Temperature and Humidity Sensor is a compact Zigbee sensor reporting temperature, relative humidity, and barometric pressure from one battery-powered device.
Temperature and Humidity Sensor T1
Aqara Temperature and Humidity Sensor T1 is a Zigbee 3.0 sensor reporting temperature and humidity, with broad coordinator compatibility across ZHA and zigbee2mqtt.
TVOC Air Quality Monitor
Aqara TVOC Air Quality Monitor is a Zigbee sensor that tracks total volatile organic compounds alongside temperature and humidity, shown on a low-power e-ink display.
Vibration Sensor
Aqara Vibration Sensor is a Zigbee accelerometer that detects vibration, tilt, and free fall, with adjustable sensitivity to suit doors, safes, and appliances.
Vibration Sensor T1
Aqara Vibration Sensor T1 is a Zigbee 3.0 accelerometer that detects vibration, tilt, and drops with adjustable sensitivity and broad coordinator compatibility.
RecommendedWater Leak Sensor
Aqara Water Leak Sensor is an IP67 Zigbee sensor that fires the instant water bridges its contacts, with local alerts that keep working even when the internet is down.
Water Leak Sensor T1
Aqara Water Leak Sensor T1 is a Zigbee 3.0 leak sensor that fires the instant water bridges its contacts. Selora AI uses it to close shut-off valves and alert homeowners before damage spreads.
Security & Safety
2 devicesSmart Gas Detector
Aqara Smart Gas Detector is a Zigbee detector that senses combustible gas and sounds a built-in alarm, exposing leak events to Home Assistant for valve shut-off and ventilation.
Smoke Detector
Aqara Smoke Detector is a Zigbee photoelectric smoke alarm with a built-in local siren, exposing fire events to Home Assistant for whole-home alerts and escape automations.