Skip to main content
Selora Homes Selora Homes
Aqara
Aqara

Climate Sensor W100

Selora recommended

Aqara Climate Sensor W100 is a Zigbee temperature and humidity sensor with an LCD display and three programmable buttons, so it reads the room and doubles as a thermostat-style wall controller.

Combines an accurate temperature and humidity sensor, an LCD readout, and three programmable buttons, so it doubles as a thermostat-style wall controller. Runs over Zigbee (Aqara Hub) or as Matter over Thread, which needs a Thread border router on the network. Only one protocol can be active at a time.
Protocols

One mode at a time: the device serves one of these combinations, not all of them at once.

Entities in Home Assistant

22 entities via Matter

Primary entities 5 What automations and dashboards use.
EntityTypeDevice classUnit
Button (3)eventbutton—
Button (4)eventbutton—
Button (5)eventbutton—
Humiditysensorhumidity%
Temperaturesensortemperature°C
Diagnostics 17 Health and troubleshooting values, hidden from dashboards by default.
EntityTypeDevice classUnit
Identify (1)buttonidentify—
Identify (2)buttonidentify—
Identify (3)buttonidentify—
Identify (4)buttonidentify—
Identify (5)buttonidentify—
Batterysensorbattery%
Battery typesensor——
Battery voltagesensorvoltageV
Boot reasonsensorenum—
Current switch position (3)sensor——
Current switch position (4)sensor——
Current switch position (5)sensor——
Reboot countsensor——
Thread channelsensor——
Thread network namesensor——
Thread routing rolesensorenum—
Uptimesensoruptime—

Verified against Home Assistant 2026.8.3: this is the entity list Home Assistant creates for this device, taken from core's own test snapshots rather than written by hand. Entity IDs depend on the name you give the device during commissioning, so only the entity names and types are shown here.

Type to search across

↑↓ navigate ↵ open
⌘K search