Cube T1 Pro
Aqara Cube T1 Pro is a Zigbee controller that turns six gestures (flip, push, rotate, shake, tap, free fall) into automation triggers, with rotation mapped to smooth dimming and volume control.
Entities in Home Assistant
8 entities via zigbee2mqtt
Primary entities 4 What automations and dashboards use.
| Entity | Type | Device class | Unit |
|---|---|---|---|
| Operation mode | select | — | — |
| Action angle | sensor | — | ° |
| Action from side | sensor | — | — |
| Side | sensor | — | — |
Diagnostics 4 Health and troubleshooting values, hidden from dashboards by default.
| Entity | Type | Device class | Unit |
|---|---|---|---|
| Action | event | — | — |
| Battery | sensor | battery | % |
| Power outage count | sensor | — | — |
| Voltage | sensor | voltage | mV |
From the zigbee2mqtt device database (zigbee-herdsman-converters
26.124.0):
the entities zigbee2mqtt creates for
CTP-R01.
Paired through ZHA instead, the same hardware produces a different set.
Events and automation triggers
Presses on this device reach Home Assistant as device triggers through
the
Zigbee Home Automation
integration, which you pick in the automation editor after pairing.
The button list, and whether each button also becomes an
event
entity, comes from what the device reports at pairing time, so it
appears once the device is on the network.
Read from Home Assistant 2026.8.3: the integration declares these trigger types, and core holds no per-model button list for this device.
Recipes using this device
No recipes reference this device yet.