Aqara FP2 is a Wi-Fi mmWave presence sensor with configurable zones, multi-target detection, and light level sensing. Used in Selora AI recipes that need precise room-level presence.
Where to buy
Some links above are affiliate links. Selora Homes may earn a commission from purchases made through these links at no extra cost to you.
Recipes using this device
Away Motion Camera Alert
Installs Home Assistant automations that watch for motion while the house is armed and send you a notification with the camera view attached. Add presence sensors to arm and disarm on their own, a siren to sound off, and lights to flash.
Motion Hallway Light
Installs a Home Assistant automation that turns a hallway or landing light on when motion is seen and off again once the space has been still for a grace period you set. Add a light sensor and it only runs after dark, add a presence sensor and it holds the light while someone lingers.
Presence Room Lighting
Installs a Home Assistant automation that keeps a room's lights on for as long as an mmWave presence sensor sees someone in it, and switches them off shortly after the room empties. Add a light sensor to run only after dark, and dimmable lights that come up softly.
Presence Thermostat Setback
Installs a Home Assistant automation that eases your thermostat into an energy-saving preset once everyone has left, and brings it back to a comfort preset the moment someone returns. Add extra occupancy sensors and any one of them counts as home.
Recipes that can use it
These recipes are built around other hardware, and pick this device up as an optional extra.
Circadian Adaptive Lighting
Installs a Home Assistant automation that walks the colour and brightness of your dimmable lights through the day, cool and bright around midday and warm and low in the evening. It only ever changes lights that are already on, so it never switches a light on by itself.
Door or Window Left Open Alert
Installs a Home Assistant automation that watches your door and window sensors and pushes a notification to your phone when one is left open past a grace period while nobody is home. Add lights and it flashes the room, add a speaker and it announces the warning out loud.
Shades by Sun and Heat
Installs a Home Assistant automation that closes your shades when the sun climbs high and the day is hot, and opens them again as the sun drops, using Home Assistant's own sun position. Add a light and temperature sensor to hold it to genuinely bright, hot afternoons.