Aqara
Multi-State Sensor P100
Aqara Multi-State Sensor P100 is a multi-state sensor that runs over Zigbee or as Matter over Thread and reports more than open or closed, suiting drawers, cabinets, and tilted openings.
Works on integrations
Protocols
One mode at a time: the device serves one of these combinations, not all of them at once.
Setup guides
Roles it can fill
Reports more than a simple open or closed state, which suits drawers, cabinets, and tilted openings, and can act as a vibration sensor. Runs over Zigbee (Aqara Hub) or as Matter over Thread, which needs a Thread border router on the network. Only one protocol can be active at a time.
Entities in Home Assistant
12 entities via Matter
Primary entities 1 What automations and dashboards use.
| Entity | Type | Device class | Unit |
|---|---|---|---|
| Door | binary_sensor | door | — |
Configuration 1 Settings exposed as entities, tunable from Home Assistant.
| Entity | Type | Device class | Unit |
|---|---|---|---|
| Sensitivity | number | — | — |
Diagnostics 10 Health and troubleshooting values, hidden from dashboards by default.
| Entity | Type | Device class | Unit |
|---|---|---|---|
| Identify | button | identify | — |
| Battery | sensor | battery | % |
| Battery type | sensor | — | — |
| Battery voltage | sensor | voltage | V |
| Boot reason | sensor | enum | — |
| Reboot count | sensor | — | — |
| Thread channel | sensor | — | — |
| Thread network name | sensor | — | — |
| Thread routing role | sensor | enum | — |
| Uptime | sensor | uptime | — |
Verified against Home Assistant 2026.8.3: this is the entity list Home Assistant creates for this device, taken from core's own test snapshots rather than written by hand. Entity IDs depend on the name you give the device during commissioning, so only the entity names and types are shown here.
Where to buy
Recipes using this device
No recipes reference this device yet.