Aqara FP300 is a Matter over Thread 5-in-1 sensor combining mmWave presence, motion, light, temperature, and humidity in one device, cutting the number of sensors needed per room.
Works on integrations
Setup guides
Roles it can fill
One device covers presence, motion, light, temperature, and humidity, cutting the number of sensors per room. Pairs over Matter and needs a Thread border router on the network.
Entities in Home Assistant
19 entities via Matter
Primary entities 4 What automations and dashboards use.
| Entity | Type | Device class | Unit |
|---|---|---|---|
| Occupancy | binary_sensor | occupancy | — |
| Humidity | sensor | humidity | % |
| Illuminance | sensor | illuminance | lx |
| Temperature | sensor | temperature | °C |
Configuration 2 Settings exposed as entities, tunable from Home Assistant.
| Entity | Type | Device class | Unit |
|---|---|---|---|
| Hold time | number | — | s |
| Sensitivity | number | — | — |
Diagnostics 13 Health and troubleshooting values, hidden from dashboards by default.
| Entity | Type | Device class | Unit |
|---|---|---|---|
| Identify (1) | button | identify | — |
| Identify (2) | button | identify | — |
| Identify (3) | button | identify | — |
| Identify (4) | button | identify | — |
| Battery | sensor | battery | % |
| Battery type | sensor | — | — |
| Battery voltage | sensor | voltage | V |
| Boot reason | sensor | enum | — |
| Reboot count | sensor | — | — |
| Thread channel | sensor | — | — |
| Thread network name | sensor | — | — |
| Thread routing role | sensor | enum | — |
| Uptime | sensor | uptime | — |
Verified against Home Assistant 2026.8.3: this is the entity list Home Assistant creates for this device, taken from core's own test snapshots rather than written by hand. Entity IDs depend on the name you give the device during commissioning, so only the entity names and types are shown here.
Where to buy
Recipes using this device
No recipes reference this device yet.