Skip to main content
Selora Homes Selora Homes
Inovelli
Inovelli

Gen 1 2-Channel Outdoor Smart Plug

SKU NZW97

The Gen 1 2-Channel Outdoor Smart Plug (NZW97) is a discontinued Z-Wave Plus outdoor plug with two independently switched outlets rated 1500W each. Z-Wave JS still drives it locally.

Works on integrations
Z-Wave
Protocols
Z-Wave
Setup guides
Z-Wave guides
Roles it can fill
Smart Plug
Discontinued. Two controlled outlets at 1500W (15A) each, 1800W (15A) combined, on 120V AC at 908.42 MHz, arriving as separate endpoints so Home Assistant shows two switch entities behind one node. The same caveat as the NZW96 applies: it is rated 32F to 104F, so do not leave it energized through a freezing winter and expect holiday lights to answer. Mains powered and repeats the mesh. No energy reporting. Z-Wave JS interviews it under Willis Electric rather than Inovelli. No retail page remains; the manual lives on the Inovelli help center.

Recipes using this device

No recipes reference this device yet.

Recipes that can use it

These recipes are built around other hardware, and pick this device up as an optional extra.

Energy · v1.0.0

High Energy Usage Alert

Installs a Home Assistant automation that watches your whole-home power draw and warns you when it stays high for longer than it should, so a heater or a forgotten appliance does not run all day unnoticed. Add speakers to hear it, add a smart plug to shed the load.

Safety · v1.0.0

Leak Auto Shutoff

Installs a Home Assistant automation that closes your water shutoff valve the instant a leak sensor goes wet, so a burst hose or a failed valve stops flooding within seconds. Add a smart plug to cut the appliance, a siren, and a speaker.

Type to search across

↑↓ navigate ↵ open
⌘K search