A 4-button KNX wall push button for JUNG's LS switch range, with a colored status LED per button and a built-in temperature sensor. Home Assistant can react to its presses through the KNX integration.
Four buttons that switch, dim, move blinds, send values or recall light scenes, with one or two functions per button. Each button has a red, green or blue status LED, and the LEDs can dim at night. It also measures the room temperature.
The module ships with a clear cover for the building phase. The finished button covers are a separate cover kit, chosen to match the room’s LS range switches.
It is programmed in ETS first. In Home Assistant, its group addresses can be added in the KNX panel, so a press can trigger an automation as well as the lights it is linked to.
Recipes using this device
No recipes reference this device yet.
Recipes that can use it
These recipes are built around other hardware, and pick this device up as an optional extra.
Movie Mode
Installs a Home Assistant automation that dims the lights when the TV starts playing and brings them back when it stops. Add shades to close, a soundbar to power on, a scene button to trigger it by hand, and dimmable accent lights.
Window Open HVAC Pause
Installs a Home Assistant automation that turns the thermostat off when a window is left open, so you are not heating or cooling the street, and turns it back to the mode it was in once every window is shut. Add door sensors and a temperature sensor for the full picture.