Skip to main content
Selora Homes Selora Homes
LG
LG

OLED evo AI W6

Not recommended SKU OLED83W6PUA

The LG OLED evo W6 is the wireless flagship of the 2026 range: a 9.9mm wallpaper panel that sits flush to the wall while a separate Zero Connect Box carries every source over a 4K 165Hz wireless link. Home Assistant's local webostv integration controls it exactly like any other LG set, which makes it the cleanest way to put a screen on a wall that has no equipment behind it.

Selora does not recommend this device

since September 2026

A September 2026 Gamers Nexus investigation caught LG webOS sets logging microphone audio with the screen off and sweeping the LAN to fingerprint phones, watches, and every other device in the house, with the harvest feeding LG's advertising arm.

The webostv integration is not the problem: it stays local and it still works. The panel behind it is the problem, and it is not something we will hand a client unmanaged. On sets already installed we block internet access at the firewall and move the TV to an isolated VLAN, which cuts the telemetry while leaving Home Assistant control intact. On new work we specify a different panel and drive it from an external streaming player. The same investigation documented webOS remote code execution bugs still moving through responsible disclosure.

Gamers Nexus investigation, reported by Notebookcheck, September 2026
Works on integrations
Protocols
Roles it can fill
Local control via webostv (local push) after a one-time on-screen pairing prompt, with no LG account. The integration difference from a wired LG set is entirely physical: every connection lives on the Zero Connect Box, not the panel. The box carries the HDMI inputs, USB, RS-232C, optical out, IR blaster, antenna, and the LAN port, so the structured cabling drop belongs at the box location, in the rack or credenza, and never behind the panel. The panel itself takes nothing but mains power. Plan the low-voltage rough-in around that split, because a wall plate with an Ethernet drop behind the screen is a wasted run on this model. Keep the box within about 30 feet of the panel with clear line of sight, since the wireless link is directional and degrades behind closed cabinetry. For Wake-on-LAN, read the MAC address out of the TV’s own network settings for the interface actually in use and record it at commissioning; the wired and wireless MACs differ, and pairing the magic packet with the wrong one is a common cause of a set that pairs correctly but refuses to power on. On 2025 and newer webOS sets, Wake-on-LAN also has to be enabled explicitly under Settings > Support > IP control settings. Both the panel and the box need mains power, which catches out installs planned around a single outlet behind the wall plate.

Where to buy

Recipes using this device

Recipes that can use it

These recipes are built around other hardware, and pick this device up as an optional extra.

Kitchen · v1.0.0

LG Dishwasher: Cycle Finished

Sends a Home Assistant push notification the moment your LG dishwasher finishes its cycle, so clean dishes get unloaded while they are still warm and dry instead of sitting overnight. Add a speaker and it announces the finished cycle out loud. Built around the LG ThinQ integration.

Works with LG ThinQ LG ThinQ
Laundry · v1.0.0

LG Dryer: Cycle Finished

Sends a Home Assistant push notification the moment your LG dryer finishes, so you unload it while the clothes are still warm and skip the wrinkles. Add a speaker and it announces the finished cycle out loud. Built around the LG ThinQ integration.

Works with LG ThinQ LG ThinQ
Kitchen · v1.0.0

LG Fridge: Door Alert

Installs a Home Assistant automation that watches your LG fridge and freezer doors, straight from the ThinQ integration, and alerts you when one is left open longer than a grace period you set. Add lights and it flashes the room; add a speaker and it announces the warning out loud.

Works with LG ThinQ LG ThinQ
Laundry · v1.0.0

LG Washer: Cycle Finished

Sends a Home Assistant push notification the moment your LG washer finishes, so the wet load moves to the dryer before it starts to smell. Add a speaker and it announces the finished cycle out loud. Built around the LG ThinQ integration.

Works with LG ThinQ LG ThinQ
Bathroom · v1.0.0

Oral-B: Kids' Brushing Check

Installs Home Assistant automations that record a brushing session from your Oral-B toothbrushes and notify you when the morning or evening brush never happened. Add a speaker and the household gets a spoken nudge before the deadline instead of a notification after it.

Works with Oral-B Oral-B
Maintenance · v1.0.0

Selora AI Health Alert

Watches Selora AI's own Home Health sensor (sensor.selora_ai_home_health) and notifies you when your home's score is declining: a sustained drop below your warning score, a fall past your critical score, or a sharp drop in a single reassessment while the score is still healthy. Add a speaker and critical alerts are announced out loud.

Safety · v1.1.0

Water Leak Alert

Installs a Home Assistant automation that watches every water leak sensor you select and alerts you the moment one goes wet, naming the spot so you know where to look. Add a speaker and the same warning is announced out loud.

Type to search across

↑↓ navigate ↵ open
⌘K search