Skip to main content
Selora Homes Selora Homes
MDT technologies logo

MDT technologies

MDT technologies builds the DIN rail KNX hardware that fills most European distribution boards: actuators, dimmers, blind controllers, and the IP interfaces and routers that put the bus on the network. Home Assistant reaches an MDT install through the KNX integration, talking to the IP gateway over KNXnet/IP with no cloud in the path.

Hardware availability

MDT sells through KNX wholesale rather than retail, so purchase links point at the manufacturer’s product pages and the model is ordered from a KNX distributor. North American orders use the USA- prefixed part numbers, which are the same hardware. Every MDT device is commissioned in ETS before Home Assistant sees anything, so the ETS project file is part of the deliverable on an MDT job, not an optional extra.
Visit MDT technologies
Compatible integrations
KNX

Devices in this brand

Hubs & Gateways

2 devices

SCN-IP000.03

The SCN-IP000.03 is MDT's KNX IP interface: a two module DIN rail device, powered from the bus, that gives Home Assistant a KNXnet/IP tunnel onto the KNX line. Four simultaneous tunnels mean ETS and Home Assistant can hold connections at the same time, with KNX IP Secure and KNX Data Secure available from ETS 5.7.

SCN-IP100.03

The SCN-IP100.03 is MDT's KNX IP router: the same two module bus powered hardware as its IP interface, plus line and area coupling over IP multicast. Home Assistant can tunnel through it like any interface, or join the bus by routing, which is the connection type that scales past a single line.

Type to search across cities, counties, and installers

↑↓ navigate ↵ open
⌘K search