The Philips Hue Smart Plug: a Zigbee on/off outlet that brings any lamp or appliance into the Hue system and Selora AI recipes, no rewiring required.
Entities in Home Assistant
3 entities via zigbee2mqtt
Primary entities 1 What automations and dashboards use.
| Entity | Type | Device class | Unit |
|---|---|---|---|
| Switch (main) | switch | — | — |
Configuration 2 Settings exposed as entities, tunable from Home Assistant.
| Entity | Type | Device class | Unit |
|---|---|---|---|
| Identify | select | — | — |
| Power-on behavior | select | — | — |
From the zigbee2mqtt device database (zigbee-herdsman-converters
26.118.0):
the entities zigbee2mqtt creates for
929003050601.
Paired through ZHA instead, the same hardware produces a different set.
Where to buy
Setup and troubleshooting
Guides written for this device: connecting it to Home Assistant and fixing it when it stops responding.
Recipes using this device
No recipes reference this device yet.
Recipes that can use it
These recipes are built around other hardware, and pick this device up as an optional extra.
High Energy Usage Alert
Installs a Home Assistant automation that watches your whole-home power draw and warns you when it stays high for longer than it should, so a heater or a forgotten appliance does not run all day unnoticed. Add speakers to hear it, add a smart plug to shed the load.
Leak Auto Shutoff
Installs a Home Assistant automation that closes your water shutoff valve the instant a leak sensor goes wet, so a burst hose or a failed valve stops flooding within seconds. Add a smart plug to cut the appliance, a siren, and a speaker.