Devices on Sub-1GHz
Tapo CentralHub H500
Tapo's top hub: 16 cameras, 64 sub-1GHz sensors, a drive bay for local recording and HDMI out to a monitor. Read the Home Assistant support caveat below before specifying it, because the integration does not cover it yet.
Tapo Smart Battery Video Doorbell D230S1
A battery video doorbell with a 2K head to toe view, shipped with the H200 hub as its chime and recorder. Read the Home Assistant streaming caveat below before specifying it.
Tapo Smart Button S200B
Tapo's rotary push button for wall or tabletop scene control, paired to a Tapo hub. Read the Home Assistant caveat below before specifying it as a scene controller.
Tapo Smart Contact Sensor T110
A magnet and reed contact sensor for doors, windows, cabinets and gates, reporting open and closed to Home Assistant through a Tapo hub.
Tapo Smart Hub H200
The hub that brings Tapo's sub-1GHz sensors, buttons and battery cameras onto the network, with a built in chime and microSD recording. Home Assistant adopts the hub and its children through the TP-Link integration.
Tapo Smart Hub with Chime H100
The plug in version of Tapo's sensor hub: same 64 device sub-1GHz radio and chime, without camera support or local video storage. The cheaper way in when the design is sensors only.
Tapo Smart Motion Sensor T100
A battery PIR motion sensor with adjustable sensitivity that reports to Home Assistant through a Tapo hub. Cheap enough to put motion in every room that needs it.
Tapo Smart Temperature and Humidity Monitor T315
A temperature and humidity sensor with a 2.7 inch e-ink display, so the reading is legible on the wall as well as in Home Assistant. Reports through a Tapo hub over sub-1GHz.
Tapo Smart Water Leak Sensor T300
A water leak sensor with its own 90dB alarm on board for water heaters, laundry pans, sump pits and under sink cabinets. Reports to Home Assistant through a Tapo hub.