No Thread devices match this filter.
The full-size HomePod (2nd generation) is a Siri speaker that doubles as infrastructure: an always-on Apple Home hub and a Thread border router. Home Assistant reaches it over AirPlay through the local apple_tv integration, so it is an announcement and multiroom audio target rather than a fully controllable player.
The HomePod mini is the cheapest way to put an Apple Home hub and a Thread border router in a room. Home Assistant sees it over AirPlay through the local apple_tv integration as a media_player for announcements and multiroom audio.
Aqara Climate Sensor W100 is a Zigbee temperature and humidity sensor with an LCD display and three programmable buttons, so it reads the room and doubles as a thermostat-style wall controller.
Aqara P2 is a Matter over Thread door and window sensor with battery state reporting, tilt detection, and tamper alerts.
Aqara Motion and Light Sensor P2 is a Matter over Thread motion sensor with a built-in light sensor that pairs natively over Matter, no Aqara hub required.
Aqara Multi-State Sensor P100 is a multi-state sensor that runs over Zigbee or as Matter over Thread and reports more than open or closed, suiting drawers, cabinets, and tilted openings.
Aqara FP300 is a Matter over Thread 5-in-1 sensor combining mmWave presence, motion, light, temperature, and humidity in one device, cutting the number of sensors needed per room.
The Aqara Smart Lock U200 is a retrofit deadbolt kit with native Matter over Thread, a wireless fingerprint keypad, and Apple home key. Home Assistant controls it locally through the Matter integration with no Aqara hub at all.
The Aqara Smart Lock U300 is a lever-handle lock with native Matter over Thread, fingerprint, keypad, and Apple home key, one of the only local-Matter leversets, for single-bore doors that cannot take a deadbolt.
The Aqara Smart Lock U400 is a fingerprint deadbolt with native Matter over Thread and UWB Apple home key, so an iPhone or Apple Watch unlocks the door hands-free. Home Assistant controls it locally through the Matter integration.
Matter 1.4 smart thermostat for 24V HVAC (furnaces, boilers, PTAC units, and heat pumps up to 2H/2C with 2-stage auxiliary heat) with a 4-inch touchscreen and mmWave presence sensing. Home Assistant controls mode, setpoints, temperature, and humidity locally through the Matter integration, and the built-in Zigbee hub bridges its child devices into Matter as well.
Connect ZBT-2 is the first party Zigbee and Thread radio for Home Assistant. It is a tuned antenna on a weighted base rather than a USB stick, so the radio sits away from the hub and its interference instead of on top of it.
ALPSTUGA is a Matter over Thread air quality sensor reporting particulates and humidity, used by Selora AI to drive ventilation, purifier, and comfort recipes.
BILRESA is a Matter over Thread remote control, available in dual-button and scroll-wheel versions, used by Selora AI to bind physical buttons to lighting and scene recipes.
GRILLPLATS is a Matter over Thread smart plug for switching lamps and appliances, used by Selora AI in lighting, energy, and schedule recipes.
KAJPLATS is a Matter over Thread smart LED bulb line in E26/E27, GU10, and E14 fittings with white and color spectrum options, used by Selora AI for lighting recipes and scenes.
KLIPPBOK is a Matter over Thread water leak sensor, used by Selora AI to catch leaks early and trigger shutoff, alert, and notification recipes.
MYGGBETT is a Matter over Thread door and window contact sensor, used by Selora AI for entry alerts, security recipes, and open-door climate automations.
MYGGSPRAY is a Matter over Thread wireless motion sensor, used by Selora AI to trigger lighting, presence, and security recipes when movement is detected.
TIMMERFLOTTE is a Matter over Thread temperature and humidity sensor with an e-paper display, used by Selora AI for comfort, climate, and condensation automations.
TOFSMYGGA is a Matter over Thread outdoor smart plug rated for wet conditions, used by Selora AI to control garden lighting, fountains, and seasonal automations.
VARMBLIXT is a Matter over Thread dimmable LED lamp with color and white spectrum, used by Selora AI for accent lighting, scenes, and ambiance recipes.
The Inovelli White Series 2-1 (VTM31-SN) is a Matter-over-Thread in-wall dimmer for wired lighting, with leading- and trailing-edge dimming. It joins Home Assistant through the Matter integration and a Thread border router, and carries a full-color RGB notification LED bar with multi-tap scene control.
The Inovelli White Series Fan & Light Canopy Module (VTM36) installs inside a ceiling-fan canopy to give independent Matter-over-Thread control of the fan motor and a dimmable light. It joins Home Assistant through the Matter integration and is typically bound to a White Series wall switch.
The Inovelli White Series Fan Switch (VTM35-SN) is a Matter-over-Thread in-wall control for AC-motor ceiling and exhaust fans, with three speed levels. It joins Home Assistant through the Matter integration and a Thread border router, and includes a full-color RGB notification LED bar with multi-tap scene control.
The Inovelli White Series On/Off Switch is a Matter-over-Thread in-wall switch with a built-in humidity sensor, making it a strong fit for bathroom and laundry exhaust fans. It joins Home Assistant through the Matter integration and a Thread border router, and adds an RGB notification LED bar with multi-tap scene control.
The Nuki Smart Lock mounts over the inside of an existing deadbolt, keeping keys and exterior hardware. Home Assistant controls it locally over Matter on Thread, with lock, unlock, and unlatch, and no cloud account needed.
The Nuki Smart Lock Ultra is the flagship retrofit for euro-profile cylinders, with a brushless motor and stainless housing. Home Assistant controls it locally over Matter on Thread or Nuki's built-in MQTT client.
The Schlage Sense Pro is Schlage's first Matter over Thread deadbolt, launched June 2026. Home Assistant controls it locally through the Matter integration, with ultra-wideband hands-free unlock and Apple home keys on the Apple side.
SMLIGHT's Silicon Labs EFR32MG24 coordinator on Ethernet or PoE. One click in its web UI switches it between a Zigbee coordinator, a Zigbee router, and a Matter-over-Thread border router, with no reflashing.
SMLIGHT's Silicon Labs EFR32MG24 USB stick. It runs as a Zigbee coordinator on ZHA or Zigbee2MQTT, or carries Thread firmware for a Matter-over-Thread border router, one protocol at a time.
SMLIGHT's dual radio Ethernet and PoE coordinator. A Texas Instruments CC2674P10 and a Silicon Labs EFR32MG24 sit in one case, so one adapter runs a Zigbee mesh and a Thread border router at the same time.
SONOFF's Zigbee and Thread USB stick on the Silicon Labs EFR32MG24, the chip family of the Home Assistant Connect ZBT-2. It is the Zigbee radio in Selora packages, because it is sold on Amazon and the ZBT-2 is not.
The Ultraloq Bolt Mission is a Matter over Thread deadbolt with ultra-wideband hands-free unlock. Home Assistant controls it locally through the Matter integration, with no Wi-Fi bridge and no U-tec cloud account required.
The Yale Smart Lock with Matter is a native Matter over Thread deadbolt Home Assistant controls locally (no module, no bridge, no Yale cloud) with PIN code management handled natively through the Matter integration.
Talk to our team about becoming a Selora Homes installer
Talk to our team about your smart home project
No found for ""
Type to search across
We use cookies for analytics and marketing to improve your experience. You can accept all cookies or decline non-essential ones. Privacy Policy
