RLN8-410
The Reolink RLN8-410 is a 12-channel NVR with eight PoE ports that powers and records Reolink cameras on a hard drive. Home Assistant's local Reolink integration adds the NVR once and its cameras with it.
A recorder with eight PoE ports: wired cameras plug straight into it, take power from it, and record continuously to its hard drive. It has 12 channels in all, of which up to eight are wired cameras. The original Duo PoE and Duo WiFi use two channels each; newer dual-lens models use one. One port to the router puts the whole system on the network.
Listed as tested in Home Assistant’s Reolink docs. Add the NVR once and every camera on it appears with its stream and detection sensors. Recording, push, and similar switches exist both on the NVR and per camera, and a feature only runs when both are on.
Reolink supports battery cameras on it only on hardware version N7MB01. Check the label, or use a Home Hub for battery cameras.
Where to buy
Setup and troubleshooting
Guides written for this device: connecting it to Home Assistant and fixing it when it stops responding.
Recipes using this device
No recipes reference this device yet.