Energy Monitor
An energy monitor measures voltage, current, and power on a circuit or whole panel and reports it to Home Assistant. It turns raw consumption into data you can automate on, bill against, and spot problems with.
Our top picks
The brands we reach for first, best to 3.
Shelly
35 modelsShelly devices that work with Selora and Home Assistant. Most Shelly products are Wi-Fi and run on the native Shelly integration for local control with no cloud required, plus MQTT. Newer Gen3 and Gen4 models add Bluetooth, Zigbee, and Matter over Wi-Fi, while the Qubino Wave line runs on Z-Wave.
Emporia
1 modelEmporia energy monitors that work with Selora and Home Assistant. The Vue's stock firmware is cloud-based, so we flash it with ESPHome (a well-established conversion for this ESP32 hardware), turning it into a fully local circuit-level monitor that pushes readings straight to Home Assistant.
IoTaWatt
1 modelIoTaWatt open-source energy monitors that work with Selora and Home Assistant. A 14-input CT monitor with an onboard web server and local data logging, polled directly by the core iotawatt integration. The project is now community-run, with current hardware manufactured and sold by CircuitIQ.
Every device in this role 59
Everything Selora deploys and supports in this role.
1PM Gen4
Shelly 1PM Gen4 is a multiprotocol relay with power metering that wires behind a switch and speaks Wi-Fi, Bluetooth, Zigbee, and Matter, so it fits almost any smart home ecosystem.
Dimmer Gen4
Multiprotocol in-wall dimmer with trailing-edge dimming up to 200 W, optional no-neutral operation, and power metering when wired with neutral. Connects over Wi-Fi, Bluetooth, Zigbee, or Matter so it fits almost any smart home stack.
Plug US Gen4
A multiprotocol US smart plug rated for 15 A (1800 W) with built-in power and energy metering. Connects over Wi-Fi, Bluetooth, Zigbee, or Matter for flexible local control across ecosystems.
Plus RGBW PM
A Wi-Fi and Bluetooth RGBW LED controller with four PWM channels and built-in power metering for 12/24 VDC strips. Drives RGBW, RGB, or up to four independent dimmable white channels with precise energy monitoring.
Pro 3EM
DIN-rail three-phase energy meter that measures voltage, current, power and power factor across all three phases via 120 A current transformers. Stores roughly 60 days of on-device data with 1-minute resolution for accurate consumption and production monitoring.
Pro Dual Cover Shutter PM
Dual-channel DIN-rail controller for two roller shutters, blinds, or awnings with per-channel power and energy metering. Wired Ethernet plus Wi-Fi and an onboard display make it a reliable fit for professional panel installs.
1PM Mini Gen4
A compact single-channel smart relay with built-in power metering that fits inside a standard wall box. Supports Wi-Fi, Bluetooth, Zigbee, and Matter for flexible integration into any smart home.
2PM Gen4
Dual-channel Wi-Fi relay with per-channel power metering and a roller/cover mode for motorized blinds and shutters. Multiprotocol Gen4 hardware adds Bluetooth, Zigbee, and Matter for flexible integration.
3EM-63 Gen3
Compact DIN-rail energy meter that monitors a three-phase system or three independent single-phase circuits up to 63 A per phase. Tracks voltage, current, active and apparent power and energy with 4-quadrant measurement for whole-home or sub-circuit visibility.
EM Gen3
Compact two-channel Wi-Fi energy meter that measures consumption with two current transformer clamps up to 80A per channel. Includes a dry-contact relay for contactor control of heavy loads like water heaters and heat pumps.
EM Mini Gen4
A compact single-phase energy meter that measures active power and energy on one circuit via direct screw-terminal connection. Gives installers accurate, real-time consumption data without bulky CT clamps.
Plus 1PM
Wi-Fi relay switch with built-in power metering, rated for up to 16A across 110-240V AC or 24-30V DC loads. Adds accurate energy monitoring to any light, appliance, or circuit for local, app-free control.
Plus 2PM
Dual-channel Wi-Fi relay with per-channel power metering for two independent loads or a single roller shutter. Obstacle detection and a safety switch make cover control reliable for blinds, awnings, and garage doors.
Plus Plug US
A Wi-Fi and Bluetooth smart plug with built-in power and energy metering, rated up to 10 A. Gives installers precise per-device consumption data and reliable on/off control for any plugged-in load.
PM Mini Gen3
Shelly PM Mini Gen3 is an ultra-compact Wi-Fi power meter that clips behind a fixture or socket to measure a circuit's voltage, current, and energy without switching the load.
Pro 2PM
Shelly Pro 2PM is a DIN-rail dual-channel relay with per-channel power metering that controls two circuits or drives a single roller shutter, with Wi-Fi, Ethernet, and Bluetooth for reliable panel connectivity.
Pro 3EM-3CT63
A three-phase DIN-rail energy meter that measures active and apparent power, energy, and power factor across three phases plus neutral using 63A CT clamps. Wired Ethernet and Wi-Fi deliver reliable real-time monitoring for panel-level installations.
Pro 3EM-400
DIN-rail three-phase energy meter with included 400A current transformers, measuring per-phase voltage, current, power, and bidirectional energy with 1% accuracy. Wired Ethernet plus Wi-Fi keeps panel-level monitoring rock solid for whole-building loads.
Pro 4PM
DIN-rail 4-channel smart relay with per-channel power and energy metering, a color LCD display, and wired Ethernet plus Wi-Fi for rock-solid professional installs. Each output is independently controlled and monitored for precise load management.
Pro Dimmer 0/1-10V PM
A DIN-rail Wi-Fi and Ethernet dimmer that drives 0-10V and 1-10V ballasts and LED drivers with built-in power and energy metering. Gives installers precise lighting control plus accurate consumption data on a single professional module.
Pro Dimmer 1PM
DIN-rail Wi-Fi, Bluetooth, and Ethernet trailing-edge dimmer with a single 200 W output and built-in power and energy metering. Wired LAN delivers reliable local control for panel and cabinet installations.
Pro Dimmer 2PM
DIN-rail two-channel trailing-edge dimmer with per-channel power and energy metering for professional lighting installations. Wired Ethernet plus Wi-Fi and Bluetooth ensure rock-solid connectivity in the panel.
Pro EM-50
DIN-rail single-phase energy meter with two metering channels measuring voltage, current and power via clamp-on 50 A current transformers, plus a built-in dry-contact relay for contactor control. Stores at least 60 days of on-device data at 1-minute resolution for accurate consumption and production monitoring.
Pro RGBWW PM
DIN-rail RGBWW LED strip controller with five outputs (RGB + CCT or up to five channels) and per-channel power metering. Wired Ethernet plus Wi-Fi keep installations reliable on professional racks.
Qubino Wave 1PM
A compact Z-Wave relay module with integrated power metering for a single 16A circuit. As a mains-powered device it repeats the Z-Wave mesh, extending range and reliability for the rest of your network.
Qubino Wave 1PM Mini
Ultra-compact Z-Wave relay module that switches a single load up to 8 A and meters power, voltage, current, and energy. As a mains-powered Z-Wave device it also repeats the mesh for stronger network coverage.
Qubino Wave 2PM
A dual-channel Z-Wave 800 in-wall relay with independent per-channel power and energy metering, ideal for controlling two lighting or appliance loads from one module. As a mains-powered Z-Wave device it repeats the mesh, extending range for other nodes.
Qubino Wave PM Mini
A compact single-channel Z-Wave power meter that monitors loads up to 16 A (3840 W) in even the tightest switch boxes. As a mains-powered device it also repeats the Z-Wave mesh, strengthening network coverage.
Qubino Wave Pro 2PM
DIN-rail 2-channel Z-Wave 800 relay with per-channel power and energy metering, controlling two independent loads up to 16 A each (25 A total). Mains-powered for breaker-box installs, it repeats the Z-Wave mesh to extend range and reliability.
Qubino Wave PRO Dimmer 1PM
A DIN-rail Z-Wave dimmer with integrated power metering for a single lighting circuit up to 200W. As a mains-powered device it repeats the Z-Wave mesh, extending range and reliability for the rest of your network.
Qubino Wave Pro Shutter
A DIN-rail Z-Wave shutter controller for one motorized roller shutter or venetian blind, with integrated power metering and slat-angle control. Mains-powered, so it repeats the Z-Wave mesh for nearby battery devices.
Wave Dimmer
A Z-Wave in-wall dimmer with built-in power metering, trailing-edge dimming up to 200W, and the flexibility to install with or without a neutral wire. As a mains-powered Z-Wave Plus device it repeats the Z-Wave mesh, strengthening network coverage.
Wave Plug US
Shelly Wave Plug US is a compact Z-Wave plug-in outlet with power metering, for switching and monitoring a lamp or appliance on a Z-Wave network.
Wave Pro 1PM
A Z-Wave 800, single-channel DIN-rail relay rated up to 16 A with integrated power metering for monitoring connected lights or appliances. Installs in the breaker panel and, when mains-powered, repeats the Z-Wave mesh to extend range.
Wave Pro Dimmer 2PM
A two-channel DIN-rail Z-Wave dimmer with per-channel power metering for halogen, dimmable LED, and ferromagnetic loads up to 200W each. As a mains-powered device it repeats the Z-Wave mesh, extending range and reliability across your network.
Smart Plug ZEN04
The Zooz ZEN04 800LR is a compact Z-Wave Long Range plug-in outlet with live power monitoring and manual button control.
High Power Relay ZEN78
The Zooz ZEN78 800LR switches 240 V loads up to 40 A with full power metering, for water heaters, compressors, and other heavy equipment.
Power Switch ZEN15
The Zooz ZEN15 is a heavy duty plug-in switch rated to 15 A with energy monitoring, for washers, dryers, sump pumps, and space heaters.
Blue Series 2-1 Switch
The Inovelli Blue Series 2-1 (VZM31-SN) is a Zigbee 3.0 in-wall control that is configurable as either an on/off switch or a dimmer for wired lighting. It pairs locally over ZHA or Zigbee2MQTT and adds a full-color RGB notification LED bar with multi-tap scene control.
Red Series 2-1 Switch
The Inovelli Red Series 2-1 (VZW31-SN) is a Z-Wave 800 Long Range in-wall dimmer for wired lighting, with leading- and trailing-edge dimming. It pairs locally over Z-Wave JS and adds a full-color RGB notification LED bar with multi-tap scene control.
Blue Series mmWave Presence Dimmer
The Inovelli Blue Series mmWave Presence Dimmer (VZM32-SN) is a Zigbee 3.0 in-wall dimmer with a built-in millimeter-wave presence sensor and a lux sensor. It dims wired lighting and reports occupancy and ambient light locally over ZHA or Zigbee2MQTT.
Blue Series On/Off Switch
The Inovelli Blue Series On/Off Switch (VZM30-SN) is a Zigbee 3.0 in-wall switch with a built-in humidity sensor, making it a strong fit for bathroom and laundry exhaust fans. It pairs locally over ZHA or Zigbee2MQTT and adds an RGB notification LED bar with multi-tap scene control.
Blue Series Smart Button Controller
The Inovelli Blue Series Smart Button Controller is a Zigbee 3.0 in-wall dimmer built around scene control, with up to six interchangeable button configurations. It dims a wired light while sending rich multi-tap and hold events locally over ZHA or Zigbee2MQTT.
Gen 2 Red Series Dimmer Switch
The Gen 2 Red Series Dimmer (LZW31-SN) is a discontinued Z-Wave 500 series in-wall dimmer with an RGB notification LED bar, multi-tap scene control and energy reporting. It is the direct ancestor of the Red Series 2-1 Switch and is still supported locally by Z-Wave JS.
Gen 2 Red Series On/Off Switch
The Gen 2 Red Series On/Off Switch (LZW30-SN) is a discontinued Z-Wave 500 series in-wall relay switch with an RGB notification LED bar, multi-tap scene control and energy reporting. Z-Wave JS still drives it locally.
Red Series mmWave Presence Dimmer
The Inovelli Red Series mmWave Presence Dimmer (VZW32-SN) is a Z-Wave 800 in-wall dimmer with a built-in millimeter-wave presence sensor and a lux sensor. It dims wired lighting and reports occupancy and ambient light locally over Z-Wave JS.
Red Series On/Off Switch
The Inovelli Red Series On/Off Switch is a Z-Wave 800 in-wall switch rated for heavy loads (up to 15 A resistive and 1/2 HP motors), so it can drive lights, fans, and outlets. It pairs locally over Z-Wave JS and adds a full-color RGB notification LED bar with multi-tap scene control.
TH1123ZB / TH1124ZB
Zigbee 3.0 line-voltage thermostats for electric baseboard, convector, and radiant ceiling heating, rated 3000 W (TH1123ZB) or 4000 W (TH1124ZB) at 240 V with silent TRIAC switching. Home Assistant reads heating demand, power, and energy and drives schedules fully locally over ZHA or Zigbee2MQTT.
TH1300ZB
Zigbee 3.0 line-voltage thermostat for electric radiant floors, rated 3600 W at 240 V with a built-in Class A GFCI and an included floor probe. Home Assistant tracks floor and room temperatures, power, and energy fully locally over ZHA or Zigbee2MQTT.
Kasa Smart Plug Mini KP115
The energy monitoring mini plug you will find already installed on most retrofit jobs. Home Assistant adopts it locally through the TP-Link integration and starts metering the appliance behind it.
Kasa Smart Plug Slim EP25
The same slim 15A body as the KP125M with energy monitoring and Apple Home support, without Matter. A low cost way to meter one appliance and switch it locally from Home Assistant.
Kasa Smart Plug Slim KP125M
A 15A Matter smart plug with energy monitoring in a slim body that leaves the neighboring outlet free. Home Assistant reads power and switches it locally through the TP-Link integration, or over Matter.
Kasa Smart Wi-Fi Power Strip HS300
Six individually switched outlets with per outlet energy monitoring, plus three USB charging ports. One Wi-Fi client covers six metered circuits, which is why it earns its place behind a rack or media wall.
Tapo Mini Smart Plug P110M
Tapo's Matter certified mini plug with fine grained energy monitoring, resolving consumption down to 0.001 kWh. Local switching and metering in Home Assistant through the TP-Link integration.
Tapo Mini Smart Plug P115
The cheapest way to get a metered outlet into Home Assistant. Same 15A mini body as the P110M, energy monitoring included, Matter left out.
Recipes that need this role
No recipes currently reference this role.