Humidity Sensor
A humidity sensor reports relative humidity so automations can manage moisture, comfort, and condensation. It pairs naturally with temperature for accurate comfort recipes.
Our top picks
The brands we reach for first, best to 3.
Aqara
6 modelsAqara devices that work with Selora and Home Assistant. Aqara products run on the Aqara cloud integration, ZHA, zigbee2mqtt, or Matter over Thread depending on the model; Aqara cameras pair locally via HomeKit or RTSP.
Zooz
2 modelsZooz designs Z-Wave devices for North American smart home installations, with a focus on reliable local control and direct-to-consumer pricing.
Shelly
4 modelsShelly devices that work with Selora and Home Assistant. Most Shelly products are Wi-Fi and run on the native Shelly integration for local control with no cloud required, plus MQTT. Newer Gen3 and Gen4 models add Bluetooth, Zigbee, and Matter over Wi-Fi, while the Qubino Wave line runs on Z-Wave.
Every device in this role 22
Everything Selora deploys and supports in this role.
Climate Sensor W100
Aqara Climate Sensor W100 is a Zigbee temperature and humidity sensor with an LCD display and three programmable buttons, so it reads the room and doubles as a thermostat-style wall controller.
Presence Multi-Sensor FP300
Aqara FP300 is a Matter over Thread 5-in-1 sensor combining mmWave presence, motion, light, temperature, and humidity in one device, cutting the number of sensors needed per room.
Temperature and Humidity Sensor
Aqara Temperature and Humidity Sensor is a compact Zigbee sensor reporting temperature, relative humidity, and barometric pressure from one battery-powered device.
Temperature and Humidity Sensor T1
Aqara Temperature and Humidity Sensor T1 is a Zigbee 3.0 sensor reporting temperature and humidity, with broad coordinator compatibility across ZHA and zigbee2mqtt.
Thermostat Hub W200
Matter 1.4 smart thermostat for 24V HVAC (furnaces, boilers, PTAC units, and heat pumps up to 2H/2C with 2-stage auxiliary heat) with a 4-inch touchscreen and mmWave presence sensing. Home Assistant controls mode, setpoints, temperature, and humidity locally through the Matter integration, and the built-in Zigbee hub bridges its child devices into Matter as well.
TVOC Air Quality Monitor
Aqara TVOC Air Quality Monitor is a Zigbee sensor that tracks total volatile organic compounds alongside temperature and humidity, shown on a low-power e-ink display.
Q Sensor ZSE11
The Zooz ZSE11 Q Sensor reports motion, temperature, humidity, and illuminance from one battery or USB powered device.
Temperature/Humidity XS Sensor ZSE44
The Zooz ZSE44 is a miniature battery temperature and humidity sensor for remote thermostat references and humidity-driven automations.
H&T Gen3
Shelly H&T Gen3 is a battery-powered Wi-Fi temperature and humidity sensor that reports room conditions to Home Assistant for climate and comfort recipes.
BLU H&T
A compact battery-powered Bluetooth temperature and humidity sensor with a CR2032 cell and roughly three-year battery life. Sold in Bluetooth and Bluetooth+Zigbee (ZB) variants, both splash and dust-resistant for kitchens, bathrooms, and basements.
BLU H&T Display ZB
Battery-powered temperature and humidity sensor with an e-paper display showing real-time readings and a clock. Sold in Bluetooth and Zigbee variants for flexible smart home integration.
Wave H&T
Z-Wave temperature and humidity sensor with Z-Wave Long Range support for whole-home environmental monitoring. Battery-powered for flexible placement, reporting climate data directly to your Z-Wave controller without cloud dependency.
Blue Series On/Off Switch
The Inovelli Blue Series On/Off Switch (VZM30-SN) is a Zigbee 3.0 in-wall switch with a built-in humidity sensor, making it a strong fit for bathroom and laundry exhaust fans. It pairs locally over ZHA or Zigbee2MQTT and adds an RGB notification LED bar with multi-tap scene control.
Red Series Smart 4-1 Sensor
The Red Series 4-in-1 Sensor (LZW60) is a discontinued Z-Wave 500 series sensor reporting motion, temperature, humidity and illuminance from one node. It runs on a CR123A battery or micro-USB power.
White Series On/Off Switch
The Inovelli White Series On/Off Switch is a Matter-over-Thread in-wall switch with a built-in humidity sensor, making it a strong fit for bathroom and laundry exhaust fans. It joins Home Assistant through the Matter integration and a Thread border router, and adds an RGB notification LED bar with multi-tap scene control.
ALPSTUGA
ALPSTUGA is a Matter over Thread air quality sensor reporting particulates and humidity, used by Selora AI to drive ventilation, purifier, and comfort recipes.
TIMMERFLOTTE
TIMMERFLOTTE is a Matter over Thread temperature and humidity sensor with an e-paper display, used by Selora AI for comfort, climate, and condensation automations.
Recipes that need this role
No recipes currently reference this role.