Light Switch
A light switch gives on/off control of a hard-wired lighting circuit from the wall. It replaces a standard switch and adds scheduling, scenes, and remote control while keeping the familiar paddle.
Our top picks
The brands we reach for first, best to 3.
-
Inovelli
8 modelsInovelli smart switches and dimmers that work with Selora and Home Assistant. Inovelli is local-first with no cloud, shipping Zigbee (Blue), Z-Wave (Red), and Matter-over-Thread (White) switches with an RGB notification LED bar and multi-tap scene control.
-
Zooz
7 modelsZooz designs Z-Wave devices for North American smart home installations, with a focus on reliable local control and direct-to-consumer pricing.
-
Lutron
2 modelsLutron Caséta devices that work with Selora and Home Assistant. Caséta products run on the Lutron Caséta integration over Clear Connect RF and require a Lutron Smart Bridge for local control.
Every device in this role 27
Everything Selora deploys and supports in this role.
Blue Series On/Off Switch
The Inovelli Blue Series On/Off Switch (VZM30-SN) is a Zigbee 3.0 in-wall switch with a built-in humidity sensor, making it a strong fit for bathroom and laundry exhaust fans. It pairs locally over ZHA or Zigbee2MQTT and adds an RGB notification LED bar with multi-tap scene control.
Gen 1 On/Off Switch
The Gen 1 On/Off Switch (NZW30) is a discontinued Z-Wave Plus in-wall relay switch with a paddle and a status LED, no scene control and no energy reporting. Z-Wave JS still drives it locally.
Gen 1 On/Off Switch w/Scenes
The Gen 1 On/Off Switch with Scenes (NZW30-S) is a discontinued Z-Wave Plus in-wall relay switch that adds multi-tap scene reporting to the plain NZW30. Z-Wave JS still drives it locally.
Gen 1 On/Off Toggle Switch w/Scenes
The Gen 1 On/Off Toggle Switch with Scenes (NZW30-ST) is a discontinued Z-Wave Plus in-wall relay switch in a toggle body rather than a paddle, with multi-tap scene reporting. Z-Wave JS still drives it locally.
Gen 2 Black Series On/Off Switch
The Gen 2 Black Series On/Off Switch (LZW30) is a discontinued Z-Wave 500 series in-wall relay switch. It is the plainest part Inovelli shipped: on/off only, with no scene control and no energy reporting.
Gen 2 Red Series On/Off Switch
The Gen 2 Red Series On/Off Switch (LZW30-SN) is a discontinued Z-Wave 500 series in-wall relay switch with an RGB notification LED bar, multi-tap scene control and energy reporting. Z-Wave JS still drives it locally.
Red Series On/Off Switch
The Inovelli Red Series On/Off Switch is a Z-Wave 800 in-wall switch rated for heavy loads (up to 15 A resistive and 1/2 HP motors), so it can drive lights, fans, and outlets. It pairs locally over Z-Wave JS and adds a full-color RGB notification LED bar with multi-tap scene control.
White Series On/Off Switch
The Inovelli White Series On/Off Switch is a Matter-over-Thread in-wall switch with a built-in humidity sensor, making it a strong fit for bathroom and laundry exhaust fans. It joins Home Assistant through the Matter integration and a Thread border router, and adds an RGB notification LED bar with multi-tap scene control.
Dry Contact Relay ZEN51
The Zooz ZEN51 800LR is a micro relay that hides behind an existing switch or up in the fixture box, adding Z-Wave control to a 120 V load up to 10 A.
On/Off Switch ZEN71
The Zooz ZEN71 800LR is a Z-Wave Long Range in-wall paddle switch for wired lighting, with multi-tap scene control and a smart bulb mode that leaves connected bulbs powered.
Scene Controller ZEN32
The Zooz ZEN32 800LR is a Z-Wave Long Range in-wall switch with four programmable scene buttons around a main relay paddle, addressing up to 35 scenes.
Double Relay ZEN52
The Zooz ZEN52 800LR packs two independently controlled 120 V relays into a single micro module for double gang retrofits.
Heavy Duty Wall Switch ZEN75
The Zooz ZEN75 800LR is a Z-Wave Long Range in-wall switch built for high-inrush loads such as fans, switched receptacles, and large lighting banks.
Toggle Switch ZEN73
The Zooz ZEN73 800LR is a Z-Wave Long Range in-wall on/off switch with a traditional toggle actuator, for installations where a decora paddle would look out of place.
XS Relay ZEN57
The Zooz ZEN57 800LR is an ultra compact 100-240 V relay module sized for switch boxes too crowded for a standard micro relay.
Caséta Claro Smart Switch DVRF-5NS
The Caséta Claro DVRF-5NS is a paddle-style smart switch for on/off control of wired lights or ceiling/exhaust fans. Rated 5 A, single-pole/3-way, neutral wire required; controlled locally via the Lutron Smart Bridge.
Caséta Original Smart Switch PD-6ANS
The Caséta PD-6ANS is a push-button smart switch for on/off control of wired lights or ceiling/exhaust fans. Pair with a Pico remote for multi-location control; managed locally via the Lutron Smart Bridge.
KeypadLinc On/Off 2487S
The Insteon KeypadLinc On/Off (2487S) is an in-wall relay switch with a multi-button scene keypad, for loads that should switch rather than dim. Its buttons drive Insteon scenes and Home Assistant recipes.
SwitchLinc On/Off Relay 2477S
The Insteon SwitchLinc On/Off (2477S) is an in-wall relay switch for lights, fans, and other loads that should not be dimmed. It is a dual-band device and repeats the Insteon powerline and RF mesh.
Kasa Matter Smart Light Switch KS205
A Matter certified in-wall switch for non dimmable loads: exhaust fans, closet lights, outdoor fixtures. No hub, no bridge, and local control from Home Assistant.
Kasa Smart 3-Way Switch HS210 KIT
Two independent smart switches in one box for bringing three way runs under app and recipe control. The on/off answer for exhaust fans, closet lights and stair runs that the single pole KS205 cannot cover.
Kasa Smart Motion-Activated Light Switch KS200M
An in-wall switch with built in motion and ambient light sensors, so hallways, laundries and garages turn themselves on without touching a plate or a recipe.
Recipes that need this role
No recipes currently reference this role.