Scene Controller

The Inovelli Blue Series 2-1 (VZM31-SN) is a Zigbee 3.0 in-wall control that is configurable as either an on/off switch or a dimmer for wired lighting. It pairs locally over ZHA or Zigbee2MQTT and adds a full-color RGB notification LED bar with multi-tap scene control.

Blue Series Fan Switch

The Inovelli Blue Series Fan Switch (VZM35-SN) is a Zigbee 3.0 in-wall control for AC-motor ceiling and exhaust fans, with three speed levels. It pairs locally over ZHA or Zigbee2MQTT and includes a full-color RGB notification LED bar with multi-tap scene control.

Red Series 2-1 Switch

The Inovelli Red Series 2-1 (VZW31-SN) is a Z-Wave 800 Long Range in-wall dimmer for wired lighting, with leading- and trailing-edge dimming. It pairs locally over Z-Wave JS and adds a full-color RGB notification LED bar with multi-tap scene control.

White Series 2-1 Switch

The Inovelli White Series 2-1 (VTM31-SN) is a Matter-over-Thread in-wall dimmer for wired lighting, with leading- and trailing-edge dimming. It joins Home Assistant through the Matter integration and a Thread border router, and carries a full-color RGB notification LED bar with multi-tap scene control.

Blue Series mmWave Presence Dimmer

The Inovelli Blue Series mmWave Presence Dimmer (VZM32-SN) is a Zigbee 3.0 in-wall dimmer with a built-in millimeter-wave presence sensor and a lux sensor. It dims wired lighting and reports occupancy and ambient light locally over ZHA or Zigbee2MQTT.

Blue Series On/Off Switch

The Inovelli Blue Series On/Off Switch (VZM30-SN) is a Zigbee 3.0 in-wall switch with a built-in humidity sensor, making it a strong fit for bathroom and laundry exhaust fans. It pairs locally over ZHA or Zigbee2MQTT and adds an RGB notification LED bar with multi-tap scene control.

Blue Series Smart Button Controller

The Inovelli Blue Series Smart Button Controller is a Zigbee 3.0 in-wall dimmer built around scene control, with up to six interchangeable button configurations. It dims a wired light while sending rich multi-tap and hold events locally over ZHA or Zigbee2MQTT.

Gen 1 Dimmer Switch w/Scenes

The Gen 1 Dimmer Switch with Scenes (NZW31-S) is a discontinued Z-Wave Plus in-wall dimmer that adds multi-tap scene reporting to the plain NZW31. Z-Wave JS still drives it locally.

Gen 1 Dimmer Toggle Switch w/Scenes

The Gen 1 Dimmer Toggle Switch with Scenes (NZW31-ST) is a discontinued Z-Wave Plus in-wall dimmer in a toggle body rather than a paddle, with multi-tap scene reporting. Z-Wave JS still drives it locally.

Gen 1 On/Off Switch w/Scenes

The Gen 1 On/Off Switch with Scenes (NZW30-S) is a discontinued Z-Wave Plus in-wall relay switch that adds multi-tap scene reporting to the plain NZW30. Z-Wave JS still drives it locally.

Gen 1 On/Off Toggle Switch w/Scenes

The Gen 1 On/Off Toggle Switch with Scenes (NZW30-ST) is a discontinued Z-Wave Plus in-wall relay switch in a toggle body rather than a paddle, with multi-tap scene reporting. Z-Wave JS still drives it locally.

Gen 2 Black Series Dimmer Switch

The Gen 2 Black Series Dimmer (LZW31) is a discontinued Z-Wave 500 series in-wall dimmer. It is the Red Series dimmer without energy reporting: the LED bar and multi-tap scene control are still there.

Gen 2 Red Series Dimmer Switch

The Gen 2 Red Series Dimmer (LZW31-SN) is a discontinued Z-Wave 500 series in-wall dimmer with an RGB notification LED bar, multi-tap scene control and energy reporting. It is the direct ancestor of the Red Series 2-1 Switch and is still supported locally by Z-Wave JS.

Gen 2 Red Series Fan/Light Switch

The Gen 2 Red Series Fan & Light Switch (LZW36) is a discontinued Z-Wave 700 series two-piece kit: a wall switch with dual LED bars plus a canopy module that splits a single fan circuit into separate fan speed and dimmable light control.

Gen 2 Red Series On/Off Switch

The Gen 2 Red Series On/Off Switch (LZW30-SN) is a discontinued Z-Wave 500 series in-wall relay switch with an RGB notification LED bar, multi-tap scene control and energy reporting. Z-Wave JS still drives it locally.

Red Series mmWave Presence Dimmer

The Inovelli Red Series mmWave Presence Dimmer (VZW32-SN) is a Z-Wave 800 in-wall dimmer with a built-in millimeter-wave presence sensor and a lux sensor. It dims wired lighting and reports occupancy and ambient light locally over Z-Wave JS.

Red Series On/Off Switch

The Inovelli Red Series On/Off Switch is a Z-Wave 800 in-wall switch rated for heavy loads (up to 15 A resistive and 1/2 HP motors), so it can drive lights, fans, and outlets. It pairs locally over Z-Wave JS and adds a full-color RGB notification LED bar with multi-tap scene control.

Red Series Smart Button Controller

The Inovelli Red Series Smart Button Controller is a Z-Wave 800 in-wall dimmer built around scene control, dimming a wired light while sending rich multi-tap and hold events. It pairs locally over Z-Wave JS with a full-color RGB notification LED bar.

White Series Fan Switch

The Inovelli White Series Fan Switch (VTM35-SN) is a Matter-over-Thread in-wall control for AC-motor ceiling and exhaust fans, with three speed levels. It joins Home Assistant through the Matter integration and a Thread border router, and includes a full-color RGB notification LED bar with multi-tap scene control.

White Series On/Off Switch

The Inovelli White Series On/Off Switch is a Matter-over-Thread in-wall switch with a built-in humidity sensor, making it a strong fit for bathroom and laundry exhaust fans. It joins Home Assistant through the Matter integration and a Thread border router, and adds an RGB notification LED bar with multi-tap scene control.

Zooz 9

Dimmer ZEN72

The Zooz ZEN72 800LR is a Z-Wave Long Range in-wall dimmer for dimmable LED loads up to 150 W, with adjustable ramp rate, minimum brightness, and multi-tap scene control.

Double Switch ZEN30

The Zooz ZEN30 800LR combines a dimmer and an on/off relay in a single gang, a direct replacement for a stacked fan and light switch.

On/Off Switch ZEN71

The Zooz ZEN71 800LR is a Z-Wave Long Range in-wall paddle switch for wired lighting, with multi-tap scene control and a smart bulb mode that leaves connected bulbs powered.

Remote Switch ZEN34

The Zooz ZEN34 800LR is a battery paddle remote shaped like a wall switch, addressing up to 14 scenes with multi-tap triggers.

Scene Controller ZEN32

The Zooz ZEN32 800LR is a Z-Wave Long Range in-wall switch with four programmable scene buttons around a main relay paddle, addressing up to 35 scenes.

Dimmer & Scene Controller ZEN35

The Zooz ZEN35 800LR pairs a dimming main button with four programmable scene buttons, addressing up to 35 scenes from one gang.

Toggle Dimmer ZEN74

The Zooz ZEN74 800LR is a Z-Wave Long Range in-wall dimmer with a traditional toggle actuator, dimming from the toggle itself or over Z-Wave.

Toggle Switch ZEN73

The Zooz ZEN73 800LR is a Z-Wave Long Range in-wall on/off switch with a traditional toggle actuator, for installations where a decora paddle would look out of place.

Wall Remote ZEN37

The Zooz ZEN37 800LR is a four-button battery wall remote, each button programmable with up to six distinct actions.

Lutron 6

Pico Paddle Remote PJ2-P2B

The Pico PJ2-P2B is a wire-free paddle-style remote that matches Caséta paddle controls, with an LED indicator. Its presses surface in Home Assistant as events for Selora AI scene control.

Pico Smart Remote (5-button, for dimmers)

The Pico PJ2-3BRL is a five-button wire-free remote for Caséta dimmers, with on, off, raise, lower, and a favorite preset. Its button presses surface in Home Assistant as events for Selora AI scene control.

Pico Original Remote for Audio PJ2-3BRL-A02

The Pico PJ2-3BRL-A02 is a wire-free remote for Sonos speakers, with play/pause, volume, and a favorite preset. Its presses surface in Home Assistant as events for Selora AI scene control.

Pico Original Remote for Fan Control PJ2-3BRL-F01

The Pico PJ2-3BRL-F01 is a wire-free remote for Caséta fan speed controls, with on, raise, lower, off, and a favorite speed. Its presses surface in Home Assistant as events for Selora AI scene control.

Pico Original Remote for Shades PJ2-3BRL-S01

The Pico PJ2-3BRL-S01 is a wire-free remote for Caséta smart shades, with open, raise, lower, close, and a favorite position. Its presses surface in Home Assistant as events for Selora AI scene control.

Pico Original Remote for Switches PJ2-2B

The Pico PJ2-2B is a two-button wire-free remote that turns Caséta switches on and off from anywhere. Its presses surface in Home Assistant as events for Selora AI scene control.

Shelly 5

i4 Gen3

Shelly i4 Gen3 is a Wi-Fi input module that turns up to four wired buttons or switches into scene and automation triggers without controlling a load itself.

Plus i4

A Wi-Fi and Bluetooth scene controller with 4 switch/button inputs that triggers scenes, automations, and webhooks from wired wall switches or buttons. Powered from 110-240 VAC and installs behind existing switches to add smart control without replacing them.

Plus i4 DC

Wi-Fi and Bluetooth input controller with four low-voltage switch/button inputs powered by 5-24 VDC. Lets installers add physical scene control and trigger complex automations from any dry-contact or momentary switch.

Wave i4

Z-Wave scene controller with four digital inputs (SW1-SW4) that reads pulses from physical switches or buttons to trigger scenes, synchronized actions, and automations across your Z-Wave network. Mains-powered and fits behind any wall switch.

Wave i4 DC