Temperature Sensor
A temperature sensor reports ambient temperature so automations can react to heat and cold. It is the foundation of comfort, HVAC, and freeze-protection recipes.
Temperature sensors report the current reading at a regular interval or when the value changes by a set threshold. Indoor models drive comfort automations; outdoor and probe models extend the same logic to garages, greenhouses, and pipe runs.
How Selora AI uses temperature sensors
- HVAC automations that hold each room at its target instead of trusting a single hallway thermostat.
- Freeze protection that turns on heat or alerts the installer before pipes are at risk.
- Comfort recipes that combine temperature with presence so empty rooms are not heated or cooled.
Pairing with humidity
Many sensors report temperature and humidity together. Pairing the two lets Selora AI reason about comfort more accurately than temperature alone, since the same temperature feels different at different humidity levels.
Compatible devices
Climate Sensor W100
Aqara Climate Sensor W100 is a Zigbee temperature and humidity sensor with an LCD display and three programmable buttons, so it reads the room and doubles as a thermostat-style wall controller.
Presence Multi-Sensor FP300
Aqara FP300 is a Matter over Thread 5-in-1 sensor combining mmWave presence, motion, light, temperature, and humidity in one device, cutting the number of sensors needed per room.
Temperature and Humidity Sensor
Aqara Temperature and Humidity Sensor is a compact Zigbee sensor reporting temperature, relative humidity, and barometric pressure from one battery-powered device.
Temperature and Humidity Sensor T1
Aqara Temperature and Humidity Sensor T1 is a Zigbee 3.0 sensor reporting temperature and humidity, with broad coordinator compatibility across ZHA and zigbee2mqtt.
TVOC Air Quality Monitor
Aqara TVOC Air Quality Monitor is a Zigbee sensor that tracks total volatile organic compounds alongside temperature and humidity, shown on a low-power e-ink display.
Everything Presence One
Everything Presence One combines 24 GHz mmWave presence, PIR motion, temperature, humidity, and lux in one ESPHome device, covering everything a room automation needs from a single sensor.
TIMMERFLOTTE
TIMMERFLOTTE is a Matter over Thread temperature and humidity sensor with an e-paper display, used by Selora AI for comfort, climate, and condensation automations.
Motion Sensor
The Philips Hue Motion Sensor: a battery indoor PIR that also reports light level and temperature, the building block for occupancy and daylight-aware recipes in Selora AI.
Outdoor Motion Sensor
The Philips Hue Outdoor Motion Sensor: a weatherproof battery PIR that also reports light level and temperature, for driveway, porch, and security recipes in Selora AI.
BLU H&T
A compact battery-powered Bluetooth temperature and humidity sensor with a CR2032 cell and roughly three-year battery life. Sold in Bluetooth and Bluetooth+Zigbee (ZB) variants, both splash and dust-resistant for kitchens, bathrooms, and basements.
BLU H&T Display ZB
Battery-powered temperature and humidity sensor with an e-paper display showing real-time readings and a clock. Sold in Bluetooth and Zigbee variants for flexible smart home integration.
Flood
Shelly Flood is a battery-powered Wi-Fi water leak sensor that fires the moment its contacts detect water, and also reports ambient temperature for early freeze warnings.
H&T Gen3
Shelly H&T Gen3 is a battery-powered Wi-Fi temperature and humidity sensor that reports room conditions to Home Assistant for climate and comfort recipes.
Wave H&T
Z-Wave temperature and humidity sensor with Z-Wave Long Range support for whole-home environmental monitoring. Battery-powered for flexible placement, reporting climate data directly to your Z-Wave controller without cloud dependency.
Recipes that need this role
No recipes currently reference this role.