Skip to main content
Selora Homes Selora Homes
Shelly
Shelly

2PM Gen3

Shelly 2PM Gen3 is a dual-channel Wi-Fi relay with power metering that controls two independent circuits or drives a single roller shutter or motorized cover with position feedback.

Switch mode runs two independent loads; cover mode drives a roller shutter, blind, or awning with position control. Meters power on both channels. The native Shelly integration gives local control with no cloud required, with Bluetooth for setup and MQTT support, and a firmware update adds Matter over Wi-Fi.
Works on integrations
Shelly MQTT Matter
Roles it can fill
Relay Cover Controller

Recipes using this device

Safety · v1.0.0

Leak Auto Shutoff

Installs a Home Assistant automation that closes your water shutoff valve the instant a leak sensor goes wet, so a burst hose or a failed valve stops flooding within seconds. Add a smart plug to cut the appliance, a siren, and a speaker.

Outdoors · v1.0.0

Shades by Sun and Heat

Installs a Home Assistant automation that closes your shades when the sun climbs high and the day is hot, and opens them again as the sun drops, using Home Assistant's own sun position. Add a light and temperature sensor to hold it to genuinely bright, hot afternoons.

Recipes that can use it

These recipes are built around other hardware, and pick this device up as an optional extra.

Media · v1.0.0

Movie Mode

Installs a Home Assistant automation that dims the lights when the TV starts playing and brings them back when it stops. Add shades to close, a soundbar to power on, a scene button to trigger it by hand, and dimmable accent lights.

Type to search across

↑↓ navigate ↵ open
⌘K search