A multiprotocol US smart plug rated for 15 A (1800 W) with built-in power and energy metering. Connects over Wi-Fi, Bluetooth, Zigbee, or Matter for flexible local control across ecosystems.
One mode at a time: the device serves one of these combinations, not all of them at once.
Entities in Home Assistant
16 entities via zigbee2mqtt
Primary entities 12 What automations and dashboards use.
| Entity | Type | Device class | Unit |
|---|---|---|---|
| Current | sensor | current | A |
| Energy | sensor | energy | kWh |
| Power | sensor | power | W |
| Voltage | sensor | voltage | V |
| Switch (main) | switch | — | — |
| Wi-Fi Configuration: Wi-Fi enabled | switch | — | — |
| Wi-Fi Configuration: DNS | text | — | — |
| Wi-Fi Configuration: Gateway | text | — | — |
| Wi-Fi Configuration: IPv4 address | text | — | — |
| Wi-Fi Configuration: Network | text | — | — |
| Wi-Fi Configuration: Network mask | text | — | — |
| Wi-Fi Configuration: Password | text | — | — |
Configuration 1 Settings exposed as entities, tunable from Home Assistant.
| Entity | Type | Device class | Unit |
|---|---|---|---|
| Identify | select | — | — |
Diagnostics 3 Health and troubleshooting values, hidden from dashboards by default.
| Entity | Type | Device class | Unit |
|---|---|---|---|
| DHCP enabled | binary_sensor | — | — |
| IP address | sensor | — | — |
| Wi-Fi status | sensor | — | — |
From the zigbee2mqtt device database (zigbee-herdsman-converters
26.124.0):
the entities zigbee2mqtt creates for
S4PL-00116US.
Paired through ZHA instead, the same hardware produces a different set.
Recipes using this device
Recipes that can use it
These recipes are built around other hardware, and pick this device up as an optional extra.
Leak Auto Shutoff
Installs a Home Assistant automation that closes your water shutoff valve the instant a leak sensor goes wet, so a burst hose or a failed valve stops flooding within seconds. Add a smart plug to cut the appliance, a siren, and a speaker.
Solar Surplus EV Charging
Installs a Home Assistant automation that starts your EV charger when your solar array is producing a surplus and stops it when production drops, so the car pulls from the roof rather than the grid. Add a grid meter and a home battery and it holds back until they are happy too.