SMLIGHT's dual radio Ethernet and PoE coordinator. A Texas Instruments CC2674P10 and a Silicon Labs EFR32MG24 sit in one case, so one adapter runs a Zigbee mesh and a Thread border router at the same time.
Works on integrations
Setup guides
Roles it can fill
Two independent radios in one case, a Texas Instruments CC2674P10 and a Silicon Labs EFR32MG24, each at +20 dBm on its own rotatable +5 dB antenna, with an ESP32-S3 running SLZB-OS in front of them. Because the radios are separate silicon, Zigbee 3.0 and Thread 1.3 run at once on their own channels, which is the thing a single multiprotocol adapter cannot do and the reason to specify this over an SLZB-06. Ethernet is 10/100 with 802.3af PoE and optical isolation, and USB-C powers it where there is no PoE. Zigbee runs on ZHA or Zigbee2MQTT over the network while the Thread side runs the OpenThread border router that Matter-over-Thread devices join. 160mm by 24mm by 28mm, 86g, wall mountable, and the SMLIGHT SLZB integration reports firmware version, uptime, and diagnostics for both radios with one click updates in the web UI. Mount it away from Wi-Fi access points and USB 3.0 ports, whose 2.4 GHz noise hits Zigbee and Thread alike.
Where to buy
Recipes using this device
No recipes reference this device yet.