Skip to main content
Selora Homes Selora Homes
Sonos logo
Sonos

Amp

Selora recommended

The Sonos streaming amplifier for passive speakers: 125 W per channel, HDMI ARC for a TV, RCA line-in and a line-level subwoofer output, in a rack-friendly half-width chassis. Home Assistant sees the zone it drives as one media_player through the local sonos integration.

Works on integrations
Protocols
Roles it can fill
The device that makes Sonos work in a wired house: in-ceiling, in-wall and outdoor passive speakers run off the Amp and appear in Home Assistant as an ordinary Sonos room, which is far simpler to automate than a matrix. HDMI ARC means it can be the TV zone in a room with architectural speakers, with the same home theater controls the soundbars expose, and the RCA line-in becomes a selectable source on the media_player for a turntable or a legacy source. The RCA subwoofer output is line level, so it feeds a powered subwoofer or a separate sub amplifier; it cannot drive a passive sub directly. Ethernet gives you the wired uplink a rack should always use. One Amp is one zone, so count zones and not rooms when you specify; for four zones in one chassis, look at the Amp Multi.

Where to buy

Recipes using this device

Recipes that can use it

These recipes are built around other hardware, and pick this device up as an optional extra.

Kitchen · v1.0.0

LG Dishwasher: Cycle Finished

Sends a Home Assistant push notification the moment your LG dishwasher finishes its cycle, so clean dishes get unloaded while they are still warm and dry instead of sitting overnight. Add a speaker and it announces the finished cycle out loud. Built around the LG ThinQ integration.

Works with LG ThinQ logo
Laundry · v1.0.0

LG Dryer: Cycle Finished

Sends a Home Assistant push notification the moment your LG dryer finishes, so you unload it while the clothes are still warm and skip the wrinkles. Add a speaker and it announces the finished cycle out loud. Built around the LG ThinQ integration.

Works with LG ThinQ logo
Kitchen · v1.0.0

LG Fridge: Door Alert

Installs a Home Assistant automation that watches your LG fridge and freezer doors, straight from the ThinQ integration, and alerts you when one is left open longer than a grace period you set. Add lights and it flashes the room; add a speaker and it announces the warning out loud.

Works with LG ThinQ logo
Laundry · v1.0.0

LG Washer: Cycle Finished

Sends a Home Assistant push notification the moment your LG washer finishes, so the wet load moves to the dryer before it starts to smell. Add a speaker and it announces the finished cycle out loud. Built around the LG ThinQ integration.

Works with LG ThinQ logo
Maintenance · v1.0.0

Selora AI Health Alert

Watches Selora AI's own Home Health sensor (sensor.selora_ai_home_health) and notifies you when your home's score is declining: a sustained drop below your warning score, a fall past your critical score, or a sharp drop in a single reassessment while the score is still healthy. Add a speaker and critical alerts are announced out loud.

Safety · v1.1.0

Water Leak Alert

Installs a Home Assistant automation that watches every water leak sensor you select and alerts you the moment one goes wet, naming the spot so you know where to look. Add a speaker and the same warning is announced out loud.

Type to search across cities, counties, and installers

↑↓ navigate open
⌘K search