
A Matter certified in-wall switch for non dimmable loads: exhaust fans, closet lights, outdoor fixtures. No hub, no bridge, and local control from Home Assistant.
Neutral required, single pole only, 100 to 120V, 2.4GHz Wi-Fi. It can be commissioned into the Matter integration with the printed code or adopted by the tplink integration for local polling; either way control stays on the network. Single pole is the constraint that decides most jobs: for a three way run on a non dimmable load use the HS210, which puts a smart on/off switch into a three way run, and for a dimmable load use the KS225 or the KS230 KIT. Do not reach for the KS230 KIT to switch an exhaust fan or a non dimmable fixture, since it is a dimmer. Standard box depth is enough, but the body is deep enough to be awkward in a crowded multi gang box.
Recipes using this device
No recipes reference this device yet.