Skip to main content
Selora Homes Selora Homes
Trane
Trane

XL1050

Trane's ComfortLink II XL1050 has a 7-inch color touchscreen, Wi-Fi or Ethernet, and a built-in Z-Wave hub. It runs Trane's communicating, zoned HVAC systems with RoomIQ remote sensors, and it is the one Trane thermostat with a local Home Assistant path.

Works on integrations
Trane Local Nexia/American Standard/Trane
Protocols
Wi-Fi
Roles it can fill
Thermostat
The only Trane thermostat with local control in Home Assistant. On firmware v5.9 or later the Trane Local integration (added in HA 2026.3) reaches it over the LAN with a direct mTLS connection and no cloud. The nexia integration is the cloud-polling fallback and needs a Nexia or Trane Home account. Prefer the local trane path. It has a 7-inch color touchscreen, 2 cooling and 5 heating stages, and a built-in Z-Wave bridge. Zoning and RoomIQ remote sensors show up as extra zones and entities under this thermostat rather than as separate Home Assistant devices.

Where to buy

Buy at Trane

Recipes using this device

Climate · v1.0.0

Presence Thermostat Setback

Installs a Home Assistant automation that eases your thermostat into an energy-saving preset once everyone has left, and brings it back to a comfort preset the moment someone returns. Add extra occupancy sensors and any one of them counts as home.

Climate · v1.0.0

Window Open HVAC Pause

Installs a Home Assistant automation that turns the thermostat off when a window is left open, so you are not heating or cooling the street, and turns it back to the mode it was in once every window is shut. Add door sensors and a temperature sensor for the full picture.

Type to search across

↑↓ navigate ↵ open
⌘K search