A flat glass KNX touch panel with five buttons, a 2.4-inch display and a built-in thermostat, measuring temperature and humidity. Home Assistant controls its thermostat through the KNX integration.
A tempered glass panel 9 mm off the wall, with five backlit touch buttons and a 2.4-inch OLED display showing up to eight indicators. The glass is printed to order with the customer’s own icons and text. The backlight follows the room’s light level and dims when nobody is near.
It measures temperature and humidity, runs a thermostat, and has two inputs for push buttons, sensors or a motion detector. Zennio also makes it for the US and Canadian market.
It is programmed in ETS first. In Home Assistant, its thermostat is added as a climate control and its buttons' group addresses can trigger automations, both set up in the KNX panel.
Recipes using this device
Presence Thermostat Setback
Installs a Home Assistant automation that eases your thermostat into an energy-saving preset once everyone has left, and brings it back to a comfort preset the moment someone returns. Add extra occupancy sensors and any one of them counts as home.
Window Open HVAC Pause
Installs a Home Assistant automation that turns the thermostat off when a window is left open, so you are not heating or cooling the street, and turns it back to the mode it was in once every window is shut. Add door sensors and a temperature sensor for the full picture.
Recipes that can use it
These recipes are built around other hardware, and pick this device up as an optional extra.