The Zooz ZEN72 800LR is a Z-Wave Long Range in-wall dimmer for dimmable LED loads up to 150 W, with adjustable ramp rate, minimum brightness, and multi-tap scene control.
Entities in Home Assistant
24 entities via Z-Wave
Primary entities 1 What automations and dashboards use.
| Entity | Type | Device class | Unit |
|---|---|---|---|
| Light (main) | light | — | — |
Configuration 23 Settings exposed as entities, tunable from Home Assistant.
| Entity | Type | Device class | Unit |
|---|---|---|---|
| Identify | button | — | — |
| Auto Turn-Off Timer disabled | number | — | minutes |
| Auto Turn-On Timer disabled | number | — | minutes |
| Custom Brightness Level disabled | number | — | — |
| Indicator value disabled | number | — | — |
| Local Dimming Speed disabled | number | — | seconds |
| Maximum Brightness disabled | number | — | % |
| Minimum Brightness disabled | number | — | % |
| Night Light Mode disabled | number | — | — |
| Ramp Rate Off/On (Manual Control) disabled | number | — | seconds |
| 3-Way Switch Type disabled | select | — | — |
| Double-Tap Upper Paddle Behavior disabled | select | — | — |
| Enable/Disable Scene Control disabled | select | — | — |
| Inverted Orientation disabled | select | — | — |
| LED Indicator disabled | select | — | — |
| LED Indicator Brightness disabled | select | — | — |
| LED Indicator Color disabled | select | — | — |
| Local Programming disabled | select | — | — |
| Single-Tap Upper Paddle Behavior disabled | select | — | — |
| Smart Bulb Mode: Dimming Reporting Behavior disabled | select | — | — |
| Smart Bulb Mode: Reporting Behavior disabled | select | — | — |
| Smart Switch Mode disabled | select | — | — |
| State After Power Failure disabled | select | — | — |
Verified against Home Assistant 2026.8.3: its own Z-Wave discovery
run over core's node dump of this device
(ZEN72)
.
Most of these are configuration parameters, which Home Assistant creates
disabled and you enable as needed.
Events and automation triggers
Presses on this device reach Home Assistant as device triggers through
the
Z-Wave
integration, which you pick in the automation editor after pairing.
The button list, and whether each button also becomes an
event
entity, comes from what the device reports at pairing time, so it
appears once the device is on the network.
Read from Home Assistant 2026.8.3: the integration declares these trigger types, and core holds no per-model button list for this device.
Where to buy
Recipes using this device
No recipes reference this device yet.