"Should I use Modbus or Home Assistant as the primary controller?"

"Best practice is to use Home Assistant as the central controller and Modbus as a bridge or radio provider only. This avoids dual-management conflicts and gives you one place to manage all automations. A managed setup configures this correctly from the start."

"Can Modbus router data replace dedicated presence sensors?"

"Router-based presence detection is convenient but less reliable than dedicated sensors. Phones disconnect from Wi-Fi in sleep mode, guests may not be on your network, and latency varies. A managed setup combines network presence with other signals for accuracy."

"How do I keep Modbus hub firmware updates from breaking my smart home?"

"The best approach is to disable automatic updates on Modbus hubs and test updates manually before applying them. A managed Selora setup does this automatically — testing firmware in a staging environment before rolling it out to production."

Modbus & Home Assistant

Network & Hubs

Modbus integrates with Home Assistant to bridge network infrastructure and smart home hubs into a unified system. Connect routers, mesh networks, and device bridges that act as the backbone for your smart home devices.

With Modbus connected to Home Assistant, your network infrastructure becomes visible and automatable. Track connected devices for presence detection, monitor network health, and manage hub-connected devices alongside direct-integration devices.

Local control No cloud required

HA Documentation

How Modbus Works with Home Assistant

Getting Modbus connected to Home Assistant and running reliably.

1

Connect your hub

Add Modbus through the integrations panel. Hub-connected devices, network clients, and system health metrics appear as entities in Home Assistant.

2

Device tracking & presence

Use Modbus network data for presence detection. Know who's home based on which phones are connected to your network — no app required on their devices.

3

Network-aware automation

Build automations based on network state. When a specific device connects or disconnects, trigger scenes, adjust settings, or send notifications.

Common Modbus Issues

The problems installers run into with Modbus and Home Assistant — and how a managed setup prevents them.

Hub firmware update breaks child devices

When Modbus pushes a hub firmware update, the Zigbee/Z-Wave/Thread radio behavior can change, causing child devices to drop off the network. Recovery requires manual re-pairing.

Dual management conflicts

Managing Modbus hub devices through both the manufacturer's app and Home Assistant simultaneously can cause state conflicts. Changes in one system may not reflect in the other.

Presence detection false positives

Using Modbus router data for presence detection can be unreliable — phones in sleep mode may disconnect from Wi-Fi temporarily, causing false 'away' triggers that arm the alarm or adjust the thermostat.

mDNS/SSDP discovery blocked

Enterprise-grade Modbus networking equipment often blocks multicast by default. This prevents Home Assistant from discovering devices, requiring manual firewall and IGMP snooping configuration.

Why installers choose managed Modbus network infrastructure

Hub firmware updates tested in staging before deployment to client networks
Single-management-plane configuration to avoid dual-control conflicts
Tuned presence detection with debounce timers and multi-source confirmation
Network configuration optimized for smart home discovery protocols

Learn How We Manage Modbus

Modbus devices we deploy

Hardware from the Selora catalog that runs on this integration. Every unit is tested and supported as part of a managed installation.

View full Modbus catalog

Energy & Solar

4 devices

Home Battery 400V

SolarEdge

DC-coupled LFP home battery storing 9.7 kWh per unit, stackable up to three per inverter for 29 kWh. One of the first residential batteries to pass UL9540A unit-level fire testing, permitting indoor installation, and DC-coupling keeps round-trip losses low by skipping a conversion step.

Home Hub Inverter (SExxxxH-US)

SolarEdge

Single-phase hybrid string inverter for North America, site-configurable from 3.8 to 11.4 kW with 99% weighted efficiency and up to 200% DC oversizing. Battery-ready and EV-ready, it pairs with power optimizers for module-level MPPT and with the Home Battery 400V for storage.

Cerbo GX / Cerbo GX MK2

Victron Energy

Venus OS communication hub that unifies an entire Victron system (inverter/chargers, MPPT solar chargers, battery monitors, and tank or temperature sensors) behind Ethernet, Wi-Fi, and Bluetooth. The single endpoint Home Assistant reads for everything Victron.

MultiPlus-II (2x 120V)

Victron Energy

Inverter/charger at the heart of Victron off-grid and energy storage systems, in models from 3000 to 15000 VA including US 120V versions. PowerAssist boosts a weak grid or generator from the battery, and the UPS function switches loads over in milliseconds during an outage.