The Things Network & Home Assistant
The Things Network integrates with Home Assistant to bridge network infrastructure and smart home hubs into a unified system. Connect routers, mesh networks, and device bridges that act as the backbone for your smart home devices.
With The Things Network connected to Home Assistant, your network infrastructure becomes visible and automatable. Track connected devices for presence detection, monitor network health, and manage hub-connected devices alongside direct-integration devices.
HA DocumentationHow The Things Network Works with Home Assistant
Getting The Things Network connected to Home Assistant and running reliably.
Connect your hub
Add The Things Network through the integrations panel. Hub-connected devices, network clients, and system health metrics appear as entities in Home Assistant.
Device tracking & presence
Use The Things Network network data for presence detection. Know who's home based on which phones are connected to your network — no app required on their devices.
Network-aware automation
Build automations based on network state. When a specific device connects or disconnects, trigger scenes, adjust settings, or send notifications.
Common The Things Network Issues
The problems installers run into with The Things Network and Home Assistant — and how a managed setup prevents them.
Hub firmware update breaks child devices
When The Things Network pushes a hub firmware update, the Zigbee/Z-Wave/Thread radio behavior can change, causing child devices to drop off the network. Recovery requires manual re-pairing.
Dual management conflicts
Managing The Things Network hub devices through both the manufacturer's app and Home Assistant simultaneously can cause state conflicts. Changes in one system may not reflect in the other.
Presence detection false positives
Using The Things Network router data for presence detection can be unreliable — phones in sleep mode may disconnect from Wi-Fi temporarily, causing false 'away' triggers that arm the alarm or adjust the thermostat.
mDNS/SSDP discovery blocked
Enterprise-grade The Things Network networking equipment often blocks multicast by default. This prevents Home Assistant from discovering devices, requiring manual firewall and IGMP snooping configuration.
Why installers choose managed The Things Network network infrastructure
- Hub firmware updates tested in staging before deployment to client networks
- Single-management-plane configuration to avoid dual-control conflicts
- Tuned presence detection with debounce timers and multi-source confirmation
- Network configuration optimized for smart home discovery protocols
Frequently Asked Questions
More Network & Hubs Integrations
Ready to Install The Things Network Professionally?
Stop troubleshooting The Things Network integration issues. Let Selora handle the setup, monitoring, and maintenance so you can focus on your clients.