Selora AI Recipes

Installs a Home Assistant automation that locks your smart locks at a set time every night. Add door sensors and it holds off while a door is still open, then locks the moment the last one is shut.

Installs Home Assistant automations that watch for motion while the house is armed and send you a notification with the camera view attached. Add presence sensors to arm and disarm on their own, a siren to sound off, and lights to flash.

Flip one toggle when the baby goes down and Selora AI silences every automation in the house, except the safety ones you've marked critical. Flip it back and everything returns to exactly how it was.

Installs a Home Assistant automation that walks the colour and brightness of your dimmable lights through the day, cool and bright around midday and warm and low in the evening. It only ever changes lights that are already on, so it never switches a light on by itself.

Installs a Home Assistant automation that watches your door and window sensors and pushes a notification to your phone when one is left open past a grace period while nobody is home. Add lights and it flashes the room, add a speaker and it announces the warning out loud.

Installs a Home Assistant automation that watches your whole-home power draw and warns you when it stays high for longer than it should, so a heater or a forgotten appliance does not run all day unnoticed. Add speakers to hear it, add a smart plug to shed the load.

Installs a Home Assistant automation that checks the day's forecast each morning and skips your irrigation when enough rain is on the way, then re-enables it when the forecast is dry. Add a speaker and it tells you when it skips a day.

Works with Meteorologisk institutt (Met.no)

Installs a Home Assistant automation that closes your water shutoff valve the instant a leak sensor goes wet, so a burst hose or a failed valve stops flooding within seconds. Add a smart plug to cut the appliance, a siren, and a speaker.

Sends a Home Assistant push notification the moment your LG dishwasher finishes its cycle, so clean dishes get unloaded while they are still warm and dry instead of sitting overnight. Add a speaker and it announces the finished cycle out loud. Built around the LG ThinQ integration.

Works with LG ThinQ

Turns your LG dishwasher's machine-clean reminder into a Home Assistant push notification, so you run the tub-cleaning cycle on time instead of letting grease and odour build up. Built around the LG ThinQ integration.

Works with LG ThinQ

Turns your LG dishwasher's built-in rinse-aid sensor into a Home Assistant push notification, so you are told the moment the dispenser runs low instead of finding out from spotty glasses. Built around the LG ThinQ integration.

Works with LG ThinQ

Sends a Home Assistant push notification the moment your LG dryer finishes, so you unload it while the clothes are still warm and skip the wrinkles. Add a speaker and it announces the finished cycle out loud. Built around the LG ThinQ integration.

Works with LG ThinQ

Installs a Home Assistant automation that watches your LG fridge and freezer doors, straight from the ThinQ integration, and alerts you when one is left open longer than a grace period you set. Add lights and it flashes the room; add a speaker and it announces the warning out loud.

Works with LG ThinQ

Turns your LG fridge's built-in water filter sensor into a Home Assistant push notification, so you are told the moment the fridge reports the filter needs replacing instead of having to notice it in the app or on a dashboard. Optionally add the months-in-use sensor for an earlier heads-up.

Works with LG ThinQ

Installs a Home Assistant automation that switches your LG fridge's rapid cooling on ahead of events on your calendar, so there is plenty of ice and cold drinks when guests arrive, then switches it back off when the event ends.

Works with LG ThinQ

Creates a Fridge vacation toggle. Flip it on before you travel and Selora AI eases your LG fridge and freezer setpoints up to an energy-saving level and switches rapid cooling off. Flip it back and everything returns to exactly what it was.

Works with LG ThinQ

Sends a Home Assistant push notification the moment your LG washer or dryer reports a fault, naming the appliance and the error, so a stalled or errored cycle doesn't sit unnoticed. Built around the LG ThinQ integration.

Works with LG ThinQ

Sends a Home Assistant push notification the moment your LG washer finishes, so the wet load moves to the dryer before it starts to smell. Add a speaker and it announces the finished cycle out loud. Built around the LG ThinQ integration.

Works with LG ThinQ

Installs a Home Assistant automation that turns a hallway or landing light on when motion is seen and off again once the space has been still for a grace period you set. Add a light sensor and it only runs after dark, add a presence sensor and it holds the light while someone lingers.

Installs a Home Assistant automation that dims the lights when the TV starts playing and brings them back when it stops. Add shades to close, a soundbar to power on, a scene button to trigger it by hand, and dimmable accent lights.

Installs Home Assistant automations that record a brushing session from your Oral-B toothbrushes and notify you when the morning or evening brush never happened. Add a speaker and the household gets a spoken nudge before the deadline instead of a notification after it.

Works with Oral-B

Installs a Home Assistant automation that pauses whatever is playing the moment someone rings the doorbell, so you hear it over the film. Add your TV and streaming box so they pause too, and an outdoor light that comes on to greet the caller.

Installs a Home Assistant automation that keeps a room's lights on for as long as an mmWave presence sensor sees someone in it, and switches them off shortly after the room empties. Add a light sensor to run only after dark, and dimmable lights that come up softly.

Installs a Home Assistant automation that eases your thermostat into an energy-saving preset once everyone has left, and brings it back to a comfort preset the moment someone returns. Add extra occupancy sensors and any one of them counts as home.

Installs the Home Assistant automations that turn your Samsung TVs back on, after Home Assistant deprecated the Wake-on-LAN the samsungtv integration used to send by itself. Selora AI finds each TV's MAC address, sets up the Wake on LAN integration for you, and writes one automation per television in a single install.

Works with Samsung Smart TV

Watches Selora AI's own Home Health sensor and notifies you when your home's score is declining: a sustained drop below your warning score, a fall past your critical score, or a sharp drop in a single reassessment while the score is still healthy. Add a speaker and critical alerts are announced out loud.

Installs a Home Assistant automation that closes your shades when the sun climbs high and the day is hot, and opens them again as the sun drops, using Home Assistant's own sun position. Add a light and temperature sensor to hold it to genuinely bright, hot afternoons.

Installs a Home Assistant automation that starts your EV charger when your solar array is producing a surplus and stops it when production drops, so the car pulls from the roof rather than the grid. Add a grid meter and a home battery and it holds back until they are happy too.

Selora AI watches for tornado watches and warnings from the National Weather Service, then sounds the indoor siren and announces the shelter zone to move to, on every speaker and on your phone.

Works with National Weather Service (NWS)

Installs a Home Assistant automation that unlocks the door when you get home, and only when the house was locked, so you are not fishing for keys with an armful of shopping. Add lights and it welcomes you into a lit hallway after dark.

Installs a Home Assistant automation that watches every water leak sensor you select and alerts you the moment one goes wet, naming the spot so you know where to look. Add a speaker and the same warning is announced out loud.

Installs a Home Assistant automation that turns the thermostat off when a window is left open, so you are not heating or cooling the street, and turns it back to the mode it was in once every window is shut. Add door sensors and a temperature sensor for the full picture.